Milesight Temperature and Humidity Sensor EM300-TH
Note: Power supply- ER18505 Li-SOCL2 battery: 4000 mAh or 8000 mAh
Battery Life: 5 years for 4000 mAh and 10 years for 8000 mAh (10 min interval)
If you're looking for a low-cost, high-quality temperature sensor, compatible with LoRaWAN networks like Helium, The Things Network, Actility, ChirpStack, and so forth, consider the Milesight EM300-TH.
It's based on the Sensirion SHT-31 sensor; in MCCI's testing, this is a very accurate and stable sensor for temperature and humidity. It has excellent battery life: 5 years standard, up to 10 years with second battery (not included).
It's not open-source, but it's otherwise comparable to MCCI's Catena 4831 indoor environmental sensor.
IP67 ingress protection has two meanings.
1. IP6x means that the EM300-TH is totally protected against the ingress of dust.
2. IPx7 means that the EM300-TH is protected against immersion in up to 1 meter of water for up to 30 minutes. Thus the device is protected against splashing from a shower or accidental dunking.
The EM300-TH has been field-tested by MCCI, and is supported by MCCI's team of LoRaWAN experts.
Contact MCCI via email for devices pre-configured for your target network, for complete systems, or to set up a call to discuss your requirements.
Features
- Embedded with Sensirion high-precision sensor chip
- Ultra-wide-distance transmission up to line of sight of 10km
- IP67 UV-resistant and waterproof enclosure for harsh environment applications
- Built-in 4000 mAh replaceable battery and works for more than 5 years without replacement
- Store locally 3, 000 historical records and support retransmission to prevent data loss
- Support Milesight D2D protocol to enable ultra-low latency and direct control without gateways
- Equipped with NFC for easily configuration
- Compliant with standard LoRaWAN® gateways and network servers
- Quick and easy management with Milesight IoT Cloud solution
Specifications
|
Wireless Transmission |
|
|
Technology |
LoRaWAN®, Milesight D2D |
|
Frequency |
CN470/IN865/RU864/EU868/US915/AU915/KR920/AS923-1&2&3&4 |
|
Tx Power |
16dBm(868 MHz)/20dBm(915 MHz)/19dBm(470 MHz) |
|
Sensitivity |
-137dBm @300bps |
|
Mode |
OTAA/ABP Class A |
|
Measurement |
|
|
Temperature |
|
|
Range |
-30°C to + 70°C |
|
Accuracy |
0°C to + 70°C (+/- 0.3°C), -30°C to 0°C (+/- 0.6°C) |
|
Resolution |
0.1°C |
|
Humidity |
|
|
Range |
0% to 100% RH |
|
Accuracy |
10% to 90% RH (+/- 3%), below 10% and above 90% RH (+/- 5%) |
|
Resolution |
0.5% RH |
|
Operation |
|
|
Power On & Off |
NFC, Power Button (Internal) |
|
Configuration |
NFC Configuration via Mobile App |
|
Advanced Feature |
Milesight D2D Controller, Data Storage, Data Retransmission |
|
Physical Characteristics |
|
|
Power Supply |
1 × 4000 mAh ER18505 Li-SOCL2 Battery (extendable to 2 batteries) |
|
Battery Life* |
10 years (10 min interval) |
|
Operating Temperature |
-30°C to +70°C |
|
Relative Humidity |
0% to 100% (non-condensing) |
|
Ingress Protection |
IP67 |
|
Dimension |
88.5 × 85.3 × 27 mm (3.48 × 3.36 × 1.06 in) |
|
Installation |
Wall Mounting |
|
Approvals |
|
|
Regulatory |
CE, FCC |
|
Environmental |
RoHS |
